Search the forum,

Johnson and starley J50 warm air unit

Post new thread

Discuss Johnson and starley J50 warm air unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

Richie_77

hi all
I have a Johnson and starley j50 warm air unit thats playing up. It starts, runs goes off on its stat then the only way to get it to run again is to turn the power off and on again.

Any ideas??
 
Get in touch with J/S their technical guys are very good.
01604762881
You'll need to tell them the model & whether it's a modairflow & a multimeter to do some tests
Or go on to their web site they've got all their technical Doc's
 
Status
Not open for further replies.

Reply to Johnson and starley J50 warm air unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
264
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
160
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
257
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Talk
Tilers Forum
Tiling Advice
Plumbers' Talk
Electrical News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock