Search the forum,

Discuss Installing a thermastat into a central heating system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

the chef

Hi,
We've not long moved into a new house. the current central heating system does not have a themastat - but instead thermatsatic valves on the radiators - which are pretty useless. Whats involved (and how easy) is it to install a thermastat?

Thanks
 
what system,boiler etc have you ?
most are pretty straight foreward
 
you can get a wireless roomstat now which save a lot of running wires etc. can be wired into any heating system or straight into the boiler if it is a combi. Drayton rf1 is good. if u dont have a timer either then rf2 ,rf3 ,or rf4 may be considered.
 
Status
Not open for further replies.

Reply to Installing a thermastat into a central heating system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
279
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
315
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
195
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
312
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
225
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock