- Messages
- 3
Just wondering if anyone has any tips or tricks for installing a butterfly valve in a plumbing system? And are there any common mistakes that newbies like me should watch out for? Thanks in advance for any help
- Thread starter saunders74
- Start date
- Replies 2
- Views 689
- installing valve
Discuss Installing a butterfly valve in the The Welcome Wagon :) area at PlumbersForums.net
- Messages
- 34,363
- Solutions
- 2
Cut the pipe straight
Use jointing compound
Don’t overtighten
Use jointing compound
Don’t overtighten
- Messages
- 3
Thank you very much, that is very helpful
Reply to Installing a butterfly valve in the The Welcome Wagon :) area at PlumbersForums.net
Similar plumbing topics
Hi,
My current hot water system needs to be replaced.
Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Newest Plumbing Threads
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 0
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0