Search the forum,

Discuss Installer in Southampton area (Marchwood) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

Frankenstein

I have a conventional CH system (Glow Worm Mk2). I would like replace the boiler (keeping conventional). I'm looking at Valliant, WB or Ideal - at present I don't really mind which but I want someone who knows how to correctly plug a new boiler into an old system.

So who's out there please?
 
Hi, my existing boiler is fine but it will probably need replacing. Do you specialise in any particular make of boiler?
 
I stick to the boilers you've mentioned plus BAXI and MAIN.
 
I would be happy to come round and give you a quote, I've sent you a private message :)
 
I would be happy to come round and give you a quote, I've sent you a private message :)

Hi, my PM isn't working (not sure why).

I arranged for 5 visits/quotes for next week already so I'm going to be a full of quotes soon, and I'm waiting for a couple of chaps from the forum to get back to me. I wish I'd found this forum earlier but I'm comitted to my current arrangements for now. I'll get back to you when the dust has settled. Thanks!
 
Or continue the convo on your original thread. This sub forum isn't for general discussion.
 
Status
Not open for further replies.

Reply to Installer in Southampton area (Marchwood) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
225
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
313
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
230
P
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
496
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock