Ideal Logic Heat 15 with FD error

[ShaunCorbs]

Why do you need to replace the pipes ?

 

[Ian_Moreton]

Why do you need to replace the pipes ?

The dog deicded to have a nibble on it, got half a dozen small punctures in it

 

[ShaunCorbs]

You will have to cut it back and use a coupling

To remove it from the valve push fit can be fun use an adjustable spanner set it to 10mm and use that to push the collar in on the fitting

 

[king of pipes]

This is a easy fix for a pro but a pita for a diy'er fittings you simply push the collar in using the correct tool or small adjustable spanner then pull , the water pressure will need draining before carrying out the repair , obtaining a short length of pipe and cutters is your first issue ? fittings and linners are readily available at plumbers merchants. Regards kop

 

[Ian_Moreton]

This is a easy fix for a pro but a pita for a diy'er fittings you simply push the collar in using the correct tool or small adjustable spanner then pull , the water pressure will need draining before carrying out the repair , obtaining a short length of pipe and cutters is your first issue ? fittings and linners are readily available at plumbers merchants. Regards kop

Thanks KOP, always there with sound advice. Just to clarify, when I remove the pipe, is it just a case of inserting a new lngth of pipe, or do I also need new fittings?

 

[king of pipes]

You'll need 2 couplings short length of 10mm pipe and 6 liners elbow out of the valve will be reusable I'd say.

 

[Saurabh]

Glad you got it fixed best keep the doggies away in future

Hi, my Ideal Logic 15 boiler has encountered the same fd error. The burner doesn’t start. Am not able to view the pictures from the earlier post. Could you please suggest a resolution. Thanks !