Discuss Icos Isar..... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
How many are left ?
I still have around 20 + on my books still going strong
I replaced a flow thermistor on an Icos today, that I fitted 9 years ago and its the first time its failed.
I also condemned an gloworm hideaway amongst the other rubbish ive had this week
 
Shedloads of Icos and Isar on my patch which are still working fine!
 
I can only say the same, I have a few icos's and TBH think they are ok.

Oh my god that's started it
 
I've estimated still ÂŁ1200000 worth of combi swaps left in north east thanks to staywarm and boiler svrappage
 
Was the boiler of choice for British/Scottish gas at it's launch so thousand upon thousand fitted. All parts available as far as I am aware so will be around for some time yet.
 
A guy from BG was talking about the m series to me this morning. Saying after 20,000 units they had problems, then again at 30,00 and by 40,000 units, BG withdrew their ties with Ideal. That's how pants they were.
 
The design spec was so that they fit in a kitchen cupboard. The vessel they fitted was too small, the pcb was replaced by ideal several times, was rubbish from the start.
 
Status
Not open for further replies.

Reply to Icos Isar..... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
303
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
218
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
217
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
310

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock