Discuss How to route a flush cable? in the USA area at PlumbersForums.net

Messages
6
Hi all,

Can anyone tell me how to thread this cable, on an optima 50 dual flush button?

This mechanism is shown just under the button nut (c) on page 1: http://www.siamp.co.uk/wp-content/downloads/manuals/50_5531_00_LD.pdf

Thanks in advance

PXL_20201020_092615278.jpg
 
Where the slot is need to push the wire in and the ball should go in the circle
 

Reply to How to route a flush cable? in the USA area at PlumbersForums.net

Similar plumbing topics

I need to replace my existing pneumatic button flush, as the rubber diaphragm that lifts the flush mechanism is leaking, and was wondering whether...
Replies
5
Views
8K
Hi all I've got an inbuilt pneaumatic push button cistern (came with the house) and the full flush is not working. The half flush works but isn't...
Replies
7
Views
24K
Hi , hoping someone may be able to advise - seems like this should be easy... Came home to find that my wife had had a problem with the push...
Replies
2
Views
4K
I am in the process of renovating a bathroom, one job of which is to replace the broken flush plate that I have been putting up with for some time...
Replies
1
Views
918
    • Like
There is no smell coming out of my sink plughole, never has been. There are no water leaks in the piping and U-bend under my sink. Have tried on...
Replies
24
Views
6K
Mr P Wilson
M
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock