Discuss How to remove shower cartridge? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
14
I need to replace the shower cartridge as no cold water is getting through. Do I need to remove the faceplate to access a nut? The plate has been siliconed in place so I didn't want to remove if I didn't have to!

There is only one tap with dual controls (both twist, one to turn it on, the other to change temp).

Thanks in advance.
 

Attachments

  • 18876455-2814-4EAF-8BA9-4015A9A4297C.JPG
    18876455-2814-4EAF-8BA9-4015A9A4297C.JPG
    343.1 KB · Views: 15

Reply to How to remove shower cartridge? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
287
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
233
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
276
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
332
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock