Discuss Horstmann Programmable Room Thermostat T50 - Programme Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Beccy

I have a Horstmann Programmable Room Thermostat T50 which works fine for the first programme and the last programme of the day – the lights come on the receiver fine but all the programme settings in-between don’t work – the receiver doesn’t light-up even when the thermostat is near so I have a freezing cold house during the day. I have changed the batteries and re-programmed all the timings during the day but it still won’t work! Has anyone come across this before? Would there be a setting in the receiver that may not have been set?

Any help would be gratefully received as I don’t want to replace the system if I can help it!

Thank you!
 
Status
Not open for further replies.

Reply to Horstmann Programmable Room Thermostat T50 - Programme Issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
322
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock