Help getting access to the mechanism of this tap please.

Post new thread

Discuss Help getting access to the mechanism of this tap please. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

C

ChrisGid

Messages
5
Hi, can anyone advise regarding getting access to the working mechanism within this tap. It's leaking and I want to change the washer. There's no grub nut around the base and as can be seen there's no access via the top of the tap. I'm thinking that the top skirt will unscrew with the help of a wrench and some protection but I don't want to try that until I get some confirmation advice from you guys. Ta
Various 1218.jpg
 
Probably undo the shroud and the top will come off as one rubber gloves might help you grip it
 

Reply to Help getting access to the mechanism of this tap please. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Replies
2
Views
359
Bp89
B
R
squeaky grohe bathroom tap 2 months old
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
511
Raff
R
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
162
Sonya K
S
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
292
DIwhYdidIstartThis
D
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
280
SimonG
SimonG

Newest Plumbing Threads

Back
Top