I've recently had a new bathroom installed, including a new towel rail. The plumber also installed a new tank in the airing cupboard as the old one began to leak while he was here. Every time I have the central heating on now, there are loud bangs and cracks from the pipes. It even does it hours after the heating is turned off. The noise moves around as well, from room to room. I think it might be an air pocket. I've bled the rads several times but no joy. Someone told me about using an inhibitor. Can I do this myself? What do I have to do, and where do I pour the inhibitor? Thanks.
- Thread starter richie51
- Start date
- Replies 1
- Views 767
- help noisy noisy pipes pipes
Discuss Help for noisy pipes in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Help for noisy pipes in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Hello
I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen.
The depth of the dishwasher is 550mm and the...
Creating content since 2001. Untold Media.