Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Help 20 rad system top ones not getting hot in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Super Mario

Gas Engineer
Messages
161
Ive flushed the system but the top 2 wont get hot not even legs i sucked it through return with wet vac and it was roasting but now gone cold again tried balancing but no joy system is clean no air lock bled alk rada and pumped with mains anyone know? Cheers
 
Should be a 25-80 pump if sealed
 
Have you installed the system, has it worked properly previously
 
i would say definately not big enough 25/80 should kill it but need to make sure it doesnt pump over
 
Status
Not open for further replies.

Reply to Help 20 rad system top ones not getting hot in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
196
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
421
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock