Posting a message to the forum will remove the above advertisement

Hi, welcome to the new look UKPlumbersForums.co.uk - Login with your usual login details, or sign up if you don't already have an account. If you post just once, all the advertisements get automatically removed. We have some competitions coming soon, and lots of new feaures.

Hello new to forum today

Discussion in 'New Member Introductions' started by SteveE, Aug 12, 2017.

Discuss Hello new to forum today in the New Member Introductions area at UKPlumbersForums.co.uk.

Tags:

SteveE New Member

Hello new to this site. Hoping someone can help with my toilet problem- sounds a bit wrong!! After searching previous threads for an answer I've posted question in general plumbing forum- wondered if anyone else come across this problem on a lever operated dual flush siphon.

SteveE, Aug 12, 2017

#1
Harvest Fields Trusted Plumber GSR Top Contributor!!

Welcome along and hope we can help.

Harvest Fields, Aug 12, 2017

#2
ShaunCorbs Trusted Plumber GSR Top Contributor!!

Hello and welcome

Warning If Your Asking Advice About Repairing A Fuel Burning Appliance, Dont Be Alarmed / Put Off If We Ask For Your Registration

ShaunCorbs, Aug 12, 2017

#3
SimonG Trusted Plumber

Welcome along

SimonG, Aug 12, 2017

#4
1Steven Plumber GSR

Welcome

1Steven, Aug 12, 2017

#5
Lou Administrator Admin Top Contributor!!

Welcome

Has your problem been fixed?

Like this forum? Check out TilersForums.co.uk, ElectriciansForums.co.uk and FlooringAdviceForum.com on the UK's friendliest trades network.

Lou, Aug 15, 2017

#6

(You must log in or sign up to reply here.)

Similar Threads - Hello forum today	Forum	Date
hello plumbing forum	Plumbing Forum	Feb 27, 2017
Hello new to forum	New Member Introductions	Jan 23, 2016
Hello all! another newb	New Member Introductions	Monday at 1:30 PM
Hello - Staffordshire	New Member Introductions	Jul 3, 2017
Hello , from the singing plumber	New Member Introductions	Jun 30, 2017
Hello from sunny Suffolk	New Member Introductions	May 27, 2017
A DIYer saying hello from Cheltenham	New Member Introductions	Apr 21, 2017

Latest Threads

Slow draining bath after work...
Gmozz posted Aug 23, 2017 at 4:34 AM
Help Needed — Heat Pump Water...
Alik posted Aug 23, 2017 at 2:10 AM
Solvent Weld Preparation
borisd0 posted Aug 22, 2017 at 8:52 PM
Average hourly rate for a gas...
Mgrant posted Aug 22, 2017 at 8:02 PM
Mig welder wanted can travel to...
jonnyswamp posted Aug 22, 2017 at 7:39 PM
Fitting new and Wider Shower...
jonsmile posted Aug 22, 2017 at 11:51 AM
Worcester 24i SFR Combi boiler...
Derekthewalker posted Aug 22, 2017 at 11:45 AM
advice needed on new pipework...
a5ian300zx posted Aug 22, 2017 at 10:17 AM
Putting wastes in concrete...
Ric2013 posted Aug 22, 2017 at 9:34 AM
Halstead Eden 18 CBC flame fault
Andrewbullie posted Aug 21, 2017 at 10:27 PM

- Loft Light - Please Check my Diagram posted by BlueRaa. Hi, I am fitting a loft light off a spur from a new junction box. The junction box has the terminals laid out in a line and most diagrams I have seen have them laid out in a circle. I just...
- conduit sizing question posted by Adie moore. I'm using some conduit on a job and I feel like I'm going round in circles. when deciding what size conduit is required I can't find anything in the byb, just things similar to the link below. and...
- Hi all and thx for having me posted by Roly69. Just saying hi
- Honeywell ADE Accenta G4 panel & 8EP417A RKP? posted by Steveo. Honeywell ADE Accenta G4 panel & 8EP417A RKP Wondered if anyone can help please. Just installed the above & initially had a problem with tamper lock out ! Suspected the exterior bell/strobe, so...
- Honeywell ADE Accenta G4 panel & 8EP417A RKP? posted by Steveo. Been trying to put this in the Security alarm forum !! but no joy.
- Looking for a full time fully qualified spark in Lytham/Blackpool/Fleetwood posted by Jet Electrical. Afternoon, advert below. £17/hr We are looking for an experience electrician to join our team based on the Fylde Coast. The electrician will need to have 10 years experience, with at least 5...
- RF interference from wind turbine?? posted by SpecialistEnergy. Hello all, I have a customer who wants to install an internet bridge. The equipment is quite cheap if you use the 5Ghz frequency, but to save costs I would like to put the receiver on an existing...
- Suggestions for some cheap emergency lighting for a loft please? posted by electricans_son. I use my loft as a storage area, it is about 20 m long and fairly narrow, and I would like suggestions for some cheap emergency lighting for it please. I was thinking of a non-maintained light...
- Exhibitor Power supply adaptor at NEC posted by Dazz. Hello I will be an exhibitor at an exhibition to be held at the NEC early next year. I am going to display multiple specialist outdoor LED displays. All of my displays are wired with NZ plugs. I...
- Suggestions please ................ posted by Murdoch. Ok, got 2 clients asking for similar products . Outside "porch" ceiling light with integrated PIR or microwave sensor Max diameter about 150mm Anyone suggest anything Thanks
- Name that tune and start another. posted by timeless john. He lay face down in the desert sand . Name that tune?
- Awkward DIY Tile round valve posted by Hew. Hello, how do I go about tiling this area (photos attached)? I need to tile it before the fitter returns. The panel is screwed on but hasn't been plastered. Do I need to level it up with...
- How do you deal with cowboys posted by jimbob. Absolutely furious with some cowboy builders who are completely taking the biscuit. They've not done near as much as they should have on any given day and are holding up the whole show. And...
- Self Employed after Tiling Course posted by sean3062. Is a 13 day course enough to give you a base to go self employed as a tiler it doesnt seem very long
- Why Not Say Good Morning Before Work? posted by antonio. why not say good morning before work? We start Monday? tomorrow x workers :)
- Which Mapei (None rapid) for porcelain ? posted by LJD. Did the floor today with Rapid mapei . Found it was going off too quickly .Tiles cut and laid Dry etc first to make sure all good. Just found the mapei Rapid had gone off in the bucket within...
- Let's have some Grout talk posted by Localtiler. what's your favourite grout that you use whenever possible? For a long long time I've used grout 3000, always found it ok to use and it's versatile, but recently I've used palace that was...
- Wetroom tiles - are they ok to use ? posted by Matchless Plumb. Hi lads, As mentioned earlier I have gor 2 projects with similar style of bathroom finishes. It will be old Victorian looking bathrooms. However, the first customer has chosen those tiles...
- Grasmere C Geo Hallway posted by hmtiling. hmtiling submitted a new contest entry: Grasmere C Geo Hallway This hallway was a pumped... Click to expand... Grasmere C Geo Hallway
- Not Even Bosch Can Answer This... posted by theandroids. Hi, can someone please help. I purchased a Bosch PWS 700-115 Angle Grinder to take up thin Set only problem is, its impossible to do it without a dust extraction shroud. Does anyone know what...

Plumbing Advice - Plumbers Advice

UKPlumbersForums.co.uk provides free plumbing advice to both professional and DIY British plumbers, and professional heating engineers. We're part of the largest British tradesman's advice network, and also provide free British electrical advice, and free British tiling advice. We're busy creating news websites too, the first online is the tile blog. A way to keep up to date with what's going on with the British tile industry around the globe.

Untold Media

Hello new to forum today

SteveE New Member

Harvest Fields Trusted Plumber GSR Top Contributor!!

ShaunCorbs Trusted Plumber GSR Top Contributor!!

SimonG Trusted Plumber

1Steven Plumber GSR

Lou Administrator Admin Top Contributor!!

Hello new to forum today

Useful Searches