Discuss Heatrae sadia water heaters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
Do you need your unvented ticket to fit a 10 or 15 litre heatrae sadia hotflow units?
 
Sorry guys but in 2010 Part G of the Building Regs changed so that it covers all hot water systems both vented & unvented, stored & instantaneous, to comply with the letter of the Law you now need to hold the Part G to install & commission any hot water system.
The only concession which now applies to the Litre's is that if it is below the 15 & soloing as it is installed with all the manufacturers required safety devices there is no requirement to notify Building Control.
 
Status
Not open for further replies.

Reply to Heatrae sadia water heaters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock