Search the forum,

Grohe f digital shower override safe stop to get hotter shower

Post new thread

Discuss Grohe f digital shower override safe stop to get hotter shower in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

K

Kevinz3

hi
anyone got info they can send me on th override as it keeps cutting out sometimes when you try get it hotter
 

Reply to Grohe f digital shower override safe stop to get hotter shower in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

M
Mixer mixer shower, compatible with tanked supply
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
120
Last Plumber
Last Plumber
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
133
Lou
Lou
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Advice | Electricians Blog
Tilers Forum
Tiling Forum
UK Tiling Forum
Plumbers Forum - Plumbing Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock