Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Glow worm cx 24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

fatoftheland

We have just installed the above boiler in a customers house. They specified this boiler as they had a Glowworm already.

It should have been a 3 hour job, combi off, combi on.

The boiler comes with a jig to help pre plumbing. When the jig part is used the pipes are over 12mm away from the boiler.
The flue inner cover hits the boiler top. The bottom fixing screws are impossible to get at. The rear flue is a joke. The controls are rubbish. There is an electronic pressure guage so if you have an electrical fault you have no idea if there is water in the boiler.
It took 2 days to fit this boiler.
The aav is too low and nearly impossible to reach
Never Again.
Vaillant now own Glowworm so I expected a great product.
 
Status
Not open for further replies.

Reply to Glow worm cx 24 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
281
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
429
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock