Glow worm betacom 24C low pressure

[jonnyswamp]

Just looked again at your picture, is the 60 degree light flashing or constant, have you tried resetting it

 

[Dotty]

The 60° lamp indicates low pressure as any fule kno.

It's either woman vs mouse or a cold house until hubby gets home.

 

[lame plumber]

I am sure the mouse is more scared than the woman, he has probably run upstairs and is hiding under her bed now

 

[ShaunCorbs]

you got 3 choices

make a trade with the mouse cheese for 10 mins of its time
hammer time
or be cold until hub comes home

 

[ShaunCorbs]

The gauge is showing a bar of pressure. Shouldn't need topping up. Must be something else, unless the gauge is fubbared.

open your eyes its 0.7 of a bar

 

[jonnyswamp]

The 60° lamp indicates low pressure as any fule kno.

It's either woman vs mouse or a cold house until hubby gets home.

I'll get my coat then
And another can from the garage:stuart:

 

[ShaunCorbs]

I'll get my coat then
And another can from the garage:stuart:

why only get one

 

[lame plumber]

open your eyes its 0.7 of a bar

so what about the 60 light giving low pressure, more likely the pressure gauge is furbared and the sensor is correct, needs topping up still...

 

[ShaunCorbs]

so what about the 60 light giving low pressure, more likely the pressure gauge is furbared and the sensor is correct, needs topping up still...

anything below .8 is low pressure light on them

 

[jonnyswamp]

why only get one

I've had tweveral already and the Memsahib isn't overly impressed with my current sense of humour
I may retire to the (local 70yds up the road) and take my talents where they will be appreciated