Search the forum,

Geberit ACo202 18 V

Post new thread

Discuss Geberit ACo202 18 V in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Plumbersrule

How much do Geberit ACo202 18 V, two batteries, charger, spray, case, Jaws 15mm 22mm 28mm 35mm roughly sell for less than a year old?

cheers J
 
600-900 depending on condition
 
image.jpg
 
With no jaws they are selling for Ā£900-970 and mines in much better condition to this
 
Plumbersrule said:
With no jaws they are selling for Ā£900-970 and mines in much better condition to this
Click to expand...

thats been on for ages i got mine aco203 for 1100 with jaws brand new full calibration
 
If you're looking to sell stuff on here you should build up your post count first or we will delete the thread.

Thank you.
 
Status
Not open for further replies.

Reply to Geberit ACo202 18 V in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
166
Lou
Lou
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
222
ShaunCorbs
ShaunCorbs
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
291
ShaunCorbs
ShaunCorbs
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
S
Any advice for putting this shower in ?
Hi All, Looking for some advice on my little bathroom project. I took the bath out. I got a shower jacuzzi thing. The base has 2 wheels in the corner. Do I assemble the unit first attach water and elec, and slide the very heavy unit in on the two wheels? Or do I get the base in the corner and...
Replies
2
Views
88
Staggersandfalls
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Blog
Tilers Forum
Contractor Forum
Tilers Forum
Tiling Forums
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock