Search the forum,

Discuss Gas Pizza Oven and Gas Camping Stove in the Gas Engineers Forum area at PlumbersForums.net

Messages
21
Hi,

Just after some advice please.

I have a small outdoor gas pizza oven with the below connector.
PXL_20230225_201431340.jpg



I also have the below connector (and corresponding gas cylinder) on a camping gas hob I use when we go camping.
51FnjchbxxL._AC_.jpg

My question is, can I cut off the existing connector on the pizza oven gas hose, and fit a new connector which is the same as the one on the above camping hob hose?


I already have a gas cylinder for the camping stove, and I'm trying to avoid having to buy a patio gas cylinder for the pizza oven.

Do the different regulators provide different working pressures?

The pizza oven can run on propane or butane.

Thanks for any help.
 
Last edited:
No your fine
 
Thanks.

What is the point of patio gas and a different connector?

Different type of bottle normally the bigger ones aslong as the reg is for propane and 1.5kgh/r your fine
 
Patio gas is ease of connection and disconnection, other one is left hand thread as per propane. So no need for spanner’s.
 

Reply to Gas Pizza Oven and Gas Camping Stove in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
440
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
194
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
111
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock