Search the forum,

Discuss gas boiler has been idle in storage for 2 years, will it still work? in the Central Heating Forum area at PlumbersForums.net

M

malex83

Hi all,

A friend of mine no longer needed a one year old condensing gas boiler so I took it off his hands and left it in storage for the last 2 years until I needed it. The time has come to replace my old boiler with the one that is in storage but when I was speaking with a plumber about swapping them out, he warned me that the boiler which has been idle for 2 years might not work due to dirt getting into it.

This boiler is an ideal logic regular boiler and has been lying on it's side on a table in an unheated and unused guest house. As an unused space, there is plenty of dust which has settled in the room. I did not think to cover any of the openings with protection.

The plumber said that I would be taking a lot of risk to fit this previously used and idle boiler as it might not work once he has certified it and I would have to pay him anyways for the work. Then he suggested that he could sell me a new boiler.

Is the risk as great as the plumber suggests or is he exaggerating so he can also sell me a new boiler?

Thanks for your help
 

Reply to gas boiler has been idle in storage for 2 years, will it still work? in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
125
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
443
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock