Search the forum,

Discuss G3 diy (Gods not available locally) in the DIY Plumbing Forum area at PlumbersForums.net

Messages
12
Hi, I need a small water heater for a bathroom sink tap.

I was going to have an unvented undercounter unvented cylinder installed by a plumber.

I'm a sad old git living alone and working a crappie job.

Twice, I have used up a very valuable days holiday to wait at home for the local G3 water God to honour me with his presence (and accept my £700 ritual offering).

Sadly, this God is far too important and powerful. It is beneath them to keep to the day arranged, they seem to enjoy messing us mere mortals around.

Rather than wasting more holidays whilst seeking a trustworthy £1000/day installer, what systems can I legally install myself? I already have a 3kw heater that just passed the electricians inspection (before the heater expired).
 
Under 16L doesn't need to be installed by someone who is g3

If I recall correctly

Wrong sorry just doesn’t need to be building control notified
 
OK. Thanks. So the only choices are;
1) fit an immersion heater with header tank and overflow.
2) lube up, bend over, write off the rest of my holidays, phone 6 plumbers - book them all and hope at least one is honest enough to show up.

Please let me know if there are any other options.

Thanks again
 
 

Reply to G3 diy (Gods not available locally) in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock