Discuss Fully Integrated Dishwasher in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
78
I need to replace our slimline dishwasher that is built into the kitchen furniture. I am considering a Hotpoint LSTB 4B00 or a Whirlpool ADG211. My question is: what does "fully integrated" mean? I want to transfer the existing front from the existing machine to the new one. Is this always possible if I buy a "fully integrated" dishwasher or do some types come with a front that cannot be changed?
 
Fully integrated just means full height door. Some dishwashers have half doors with the controls above on show.
e.jpg
 
sorry you are incorrect, fully integrated dishwashers are ones that are capable of being hidden behind cabinet doors to match the kitchen
That's what I meant. the pic is of a semi integrated dishwasher Half height door with controls on the outside.
 
Thanks for the comments - but they don't really answer my question. If I buy either of the specified dishwashers, will I be able to change the front it comes with by the one (which is the same size) on my existing dishwasher?
 
Thanks for the comments - but they don't really answer my question. If I buy either of the specified dishwashers, will I be able to change the front it comes with by the one (which is the same size) on my existing dishwasher?

Best to ask the manufacture that Q don`t you think?
 
Yes you will swap over your existing cupboard door, the new dishwasher will come with template on where to screw the door.
take your time, they can be tricky to align , but they are better than they used to be
 
Yes you will swap over your existing cupboard door, the new dishwasher will come with template on where to screw the door.
take your time, they can be tricky to align , but they are better than they used to be

My error, I thought he was talking about the door of the dishwashers not the cupboard door.
 
Status
Not open for further replies.

Reply to Fully Integrated Dishwasher in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
285
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
303

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock