Discuss Flush valve for a one piece w.c. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

JCplumb

Esteemed
Plumber
Messages
2,774
Hi chaps,
as per the title of the thread - I'm looking for a replacement flush valve for a 1 piece toilet.
The pan and cistern are one piece, so can only get to the flush hole from the top.
Any ideas?
 
Status
Not open for further replies.

Reply to Flush valve for a one piece w.c. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys So a bit of a dilemma Normal WC Unit height 766mm which is around the average mark. quite alot of bogs lets say the flush pipe center...
Replies
2
Views
346
Hello, I have to replace the flush valve and/or the washer but unfortunately it's inside the vanity unit. The only way is removing the toilet. I...
Replies
16
Views
619
Hello! I was checking something in the toilet cistern. I flushed, but holding the float ball, so the cistern wouldn't be filled. With a very low...
Replies
0
Views
363
I have a wall hung pan with a concealed cistern. The flush is the "old style" Grohe Eau2 dual flush pneumatic button. When pressed the flush valve...
Replies
1
Views
1K
  • Question
My toilet flushes ok when the long flush button is pressed - but water continues to flow into the toilet bowl. No problems with the short flush. I...
Replies
13
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock