Search the forum,

Fluke T150

Post new thread

Discuss Fluke T150 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
jaydebruyne

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
Anyone know what shops stick the fluke t150 voltage tester that I could physically go to and bug one, rather than online... Been searching but everything is online ..

Oh I need the shop in London ;)
 
you sound more like the policeman from Allo Allo. most electrical merchants will have them
 
Ended up getting one from fleabay, £82.. Went to a merchants who wanted to charge me £130 for the same thing, I laughed and walked out the shop....
 
Status
Not open for further replies.

Reply to Fluke T150 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
260
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
165
Lou
Lou
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
228
mutley racers
M
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
213
Thomas J Marshall
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile News
Tiling Advice Live
DIY Forum
Contractor Talk
Tiling Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock