Discuss Flue terminals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

plumbow

Hi, guys i have a copy of the vipper book and while doing my revision is was curious to know, that on pages e -19 to e -21 there were images of terminals which were categorised as unsuitable for use with different gas appliances but it did,nt say
what to do if one were found to be unsuitable for the gas appliance it was used
for, would the situation be ATR - ID or just not to current standards ?


Thanks Mike
 
subject to m.i's - inadequate flow of p.o.c's

its about using your logic, so this means.................?

pointer= what if there was a birds nest on top of a perfectly permmissable pot?.
 
Status
Not open for further replies.

Reply to Flue terminals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
560
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
183
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
235
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
353
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
328
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock