Search the forum,

Flexicom 18hx Mode button

Post new thread

Discuss Flexicom 18hx Mode button in the USA area at PlumbersForums.net

S

stevekyd

Messages
1
The mode button on my flexicom 18hx boiler to alter the boiler heat settings is still working but has to be pressed much harder than it used to be pressed in order for the setting mode to display and allow the temperature setting to be changed. Is this likely to fail completely and what needs to be changed? Any help would be appreciated. Thank you.
 

Reply to Flexicom 18hx Mode button in the USA area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
179
Lou
Lou
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
171
John.g
J
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
352
John.g
J
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
oz-plumber
O
G
UK Moving Pipes Undersink for Dishwasher
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
499
Basher
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

TilersForums.co.uk | UK Tiling Forum - Est 2006
DIY Forum
Tile News
British Standards in Tiling BS5389
UK Tiling Forums
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock