Search the forum,

ferroli optimax HE31 boiler with a fault code F47????

Post new thread

Discuss ferroli optimax HE31 boiler with a fault code F47???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Mikewalling

As above. ferroli optimax HE31 boiler with a fault code F47??

I have goggled and read the manual and all i can find is that the fault code is not available in the UK
well im in the UK and i have this fault code... Any help on fixing this would be excellent
 
IIRC F4# code is relating to system pressure.
Your pressure ok?
 
Just had a quick look. F47 is a pressure sensor fault. You may need to have an engineer to confirm.
"F47"- that means there is at least 47+ recognised faults with this boiler, not to mention the many others that will not throw a code.
Does that tell you something about these boilers?
 
I think i have sorted it, just been trying different settings with the ts menu and its fired up with no code flashing..
hopefully fingers crossed it will be fine.. Thanks for your reply GrahamM
 
Hi,

I am having the exact same problem. If you could help me I would greatly appreciate it.
 
Status
Not open for further replies.

Reply to ferroli optimax HE31 boiler with a fault code F47???? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
225
Dave Moore
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
135
Stigster
Stigster
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
73
Dan
Dan
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
224
cheddarman
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock