Search the forum,

Discuss External water main insulation? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

GQuigley67

Plumbers Arms member
Plumber
Gas Engineer
Messages
5,076
Replacing an external water main and Scottish water will be inspecting it after I'm done, I'm tryin to find insulation but have had no luck, the type that's in a duct you can put over pipe for when it enters property and where a minimum of 750mm can't be achieved.

Does anyone have copy of the BS?
 
Just the thing I was looking for thank you good sir, this will come in handy next time I do a water main, I decided to go with Armaflex class-o and put it into a cable duct, needed to order materials today so I have them for Friday.
 
Status
Not open for further replies.

Reply to External water main insulation? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
196
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock