Search the forum,

exposed shower valves...

Post new thread

Discuss exposed shower valves... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,172
With 150 centres. Any recommendations. Not really over 200 bucks. Have 150 centres and are not bar valves. Mira or Bristan I guess
 
Bristan Capri Sequential EV mixer, fitted a few and pretty good nice size and price!
 
When it says the inlets can b 110mm to 155, is it due to off set connectors? Or can you move the inlet connections inside the valve and connect compression?
 
What make showers do you all recommend normally to customers normally? Do you have a set thermostatic mixer/electric/pumped shower you always use?
I've been looking at some of the aqualisa stuff but it's gets pretty expensive.
 
Status
Not open for further replies.

Reply to exposed shower valves... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

A
Bristan 1901 Shower Cartridge replacement problem
I'm replacing the shower cartridge on my Bristan 1901 Thermostatic Exposed Dual Control Shower (Top Outlet). I have removed the cap and screw but the temperature handle won't come off. Am I missing something or does it just need more force?
Replies
0
Views
241
AlexTTT
A
S
Unvented cylinder/shower valve
Hi All I had an unvented cylinder fitted about 6 years ago. It only supplies hot water to my shower. I was hoping for a much better flow rate from the shower but it seemed no different from the original combi boiler hot feed. There is (unusually) a lever that lets me select the combi or the...
Replies
2
Views
545
Steveo111
S
S
Extending Pipe Centres
Hi there, so I have 0 plumbing knowledge here so sorry if I say the wrong things. Currently we have a Mira Moto Shower ( equivalent to Minilite) which we want to replace. Current pipe centres are at 110cm. We like our tiles and ideally just want to replace the shower as the mixer valve has...
Replies
1
Views
512
Ben-gee
B
P
Recommend Exposed Thermostatic Mixer Shower
Hi All Just looking for some advice on which Exposed Thermostatic Mixer Shower (Bar Shower) would go well with the Shower Pump i'm getting installed. So the pump is the - SALAMANDER PUMPS CT FORCE 30 SU REGENERATIVE SINGLE SHOWER PUMP 3.0BAR from ScrewFix - seems like a decent one for the...
Replies
4
Views
626
Pioneer25
P
C
DIY shower with exposed pipework
Hi everyone. I'm installing a walk in shower, opening into shower will be on right, mixer value on right, but shower head and drain on left. The pipe work from the shower mixer valve is exposed silver colour pipework. the pipe work will run up from the valve then take a hard left at the ceiling...
Replies
9
Views
1K
christrickey1972
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Cutters
UK Tiling Forum
British Standards in Tiling BS5389
Tiling Forum UK
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock