Search the forum,

Discuss Did I miss much in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

jonnyswamp

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,826
So who had the bargains last night ?
I was out all day and missed it all, but to be honest I'm too slow on the puter
Everything I tried to buy had sold out by the time I went through checkout
Ray needs to think about us old uns who aren't so quick on the keys :wheelchair:
I'm out again today for a mates birthday bash, so will miss it again
It's about the only time going out on the swally has actually saved me money:clap:
 
2 mag pros and the big cleaner for 275 plus vat
Worcester 29cdi Classic 729 plus the vat
2 mag (one pro normal size and one old red shorty mag)

That was about it tbh
 
I think I did better than anyone but I'll wait till I've collected my purchase before I show off...
 
Ray knows I would create such a scene in his very own fareham branch, he just wouldn't run the risk!

There's a gag here about being mugged over, but I can't be bothered to work it out.

We have now sold out of all Ideal promotional stock, and some Vaillant models - particularly the Pro28ERP are also now gone.

We still have WB, a few remaining Vaillant, Glowworms, Baxi, Main and a few Intergas.
 
Status
Not open for further replies.

Reply to Did I miss much in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
227
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock