Search the forum,

Discuss Denso Tape fitting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stratplus

Plumbers Arms member
Plumber
Gas Engineer
Messages
963
Has anyone used this before for wrapping joints on underground gas pipe?
Instructions say to prime pipe first?
Does it matter which way you wrap it around the pipe ie outside coating of denso to pipe surface or inside denso coating to pipe surface?
 
Never heard of priming the pipe! What does that require? I don't think there is a difference between the sides of the tape - it is a woven mesh impregnated with the grease so it's all the same as far as I know..
 
Priming the pipe is a new one on me. As Mas said, it's a fibrous bandage heavily impregnated with grease. Wear gloves.
 
My days as an apprentice working for a "slightly" tight boss (taught me everything I know!), no gloves, just rub them in sand afterwards..........
 
Rub washing up liquid on your hands first, before touching the denso, it stops it sticking to your hands.
 
I presume that once upon a time some red lead or now red oxide primer could have been used, but a bit pointless considering denso is grease based
 
I hate denso... [remembers wrapping gas pipes as an apprentice]
 
never primed it,new too me,used denso lots,just wrap it round in a spiral motion,use gloves and cut it with a hacksaw
 
Can't see a need for primer as said above
Don't wear gloves, you don't get the true "feel" of Denso and there's nothing like spending 2 hrs or so trying to clean your hands and tools etc
It should be a mandatory part of apprenticeships that they are forced to wrap a pipe, outside, in a muddy shallow trench, with horizontal freezing rain hitting them on the bare arrs crack without any gloves
Didn't do me any harm:1eye:
Do I sound Bitter?
 
There's a recent GS tech bulletin detailing how it should be applied to gas pipes....I don't recall it mentioning priming
 
Status
Not open for further replies.

Reply to Denso Tape fitting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
273
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
221
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Replies
2
Views
295
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
298
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
295
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock