Discuss Danfos TP9000 issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
hello, I recently moved into new flat fitted with danfoss tp9000 programmable thermostat for both central heating and domestic hot water. Issue is my heating and hot water both seem to be working all time even though I have programmed on off events in tp9000. The tp9000 indicator light comes on and off as per my timed events but regardless of that my boiler (unvented indirect water boiler) seems to be working all time being controlled by its own thermostat. My understanding is that the boiler thermostat should operate only during the hot water On event in tp9000. Any clues as to what might be broken? The tp9000 is wall mounted and main power supplied without any remote sensor.

Thx in advance for help.
 
Rented ?
 
I would say time to call a pro out
 
The chances are that the problem is not with the programmer or the
boiler.

What is the make and model of your boiler?

Do you know what type of heating system do you have?

Does your system have 2 port/ 3 port valves probably in or around
the airing cupboard?
 
The chances are that the problem is not with the programmer or the
boiler.

What is the make and model of your boiler?

Do you know what type of heating system do you have?

Does your system have 2 port/ 3 port valves probably in or around
the airing cupboard?

Boiler: Range Tribune HE Indirect Unvented Hot water cylinder (manufactured by kingspan)
Central District Heating system (hydronic)
Separate zone valves for central heating (1-zone) and domestic hot water
2 port valve

Thx
 
The Range Tribune HE Indirect Unvented Hot water cylinder is not a boiler.

It would be best for you to get a heating technician in to check out your
system.

The problem likely to be to do with the zone valves but could be something else.
 
Status
Not open for further replies.

Reply to Danfos TP9000 issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, moved to the house with tp9000 controller with sensor downstairs and another thermostat in top bedroom. Normally all works ok , ch and hw...
Replies
4
Views
1K
Evening All, Been having on and off issues with a Greenstar CDI classic Combi were the hot water is not heating up but only intermittently. Some...
Replies
2
Views
524
Afternoon. I have an issue with no water flow from any of the hot taps in the house, I can't seem to find a solution to the issue. System is a...
Replies
11
Views
378
M
I've got a heating boiler which heats up the water in a tank located in a cupboard upstairs and then from there I get hot water & hearing. I get...
Replies
2
Views
700
  • Question
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always...
Replies
8
Views
462
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock