A
ALUN THE PLUMB
lotssssssssssss of silicone haaaaaaaaaaaaaaaaaa,lotssssssssssssssssssss haaaaaaaaaaaaaa lotsssssssssssssss
Discuss Damned modern close coupled toilet !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I agree with you Avatar but I do tend to put a small smear of Water Hawk on the siphon seal had a few which were a but uneven on the inside of the cistern. Never use anything on compression fittings waste of time. This Q plumb bloke must take ages to fit a bog waiting for half a tube of silicone aka fixes everything to go off.
i have NEVER used silicone on any part of a pan or cistern, occasionally with a leak on the donut washer i have used plumbers mait, i think it is usually down to a poor casting on the pan stopping the donut sealing 100%, as someone said earlier i find more problems if they have been over tightened, there is absolutely no need to silicone a ballcock into a cistern, your ears must be burning when someone has to change a ballvalve or a syphon after you have siliconed them together
dont sit behind your computer and take the **** lad - this site is not about that... its about helping each other out.
Reply to Damned modern close coupled toilet !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.