Discuss cross over bends in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I actually think they are great! They are very tight bends and you could never use a bender to do them like that.
Ideal for pipes on show, especially 22mm.
But you must run pipes with suitable distance apart to suit the cross overs.
You call them full crossovers and half crossovers.
I think they're great pal, whatever saves me time and hassle is being used, Less than ÂŁ2 for a 15mm full crossover and less than ÂŁ4 for a 22mm. I never pay anyway, the customer does.
The pipes are right next to each over too talons together so its tight
no in my opinion they look diy, cant you use a bender or is it to tight?
The pipes are right next to each over too talons together so its tight
Cheeky ######! I must photograph some I did. I used them for years where they suited. They don't look DIY if soldered neat and pipes are tight. :smile:
I'm sucking eggs tonight
Using your bender causes your manhood to shrink. And not a lot of people know that!
Reply to cross over bends in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.