Search the forum,

CP12 for new boiler for non rented property

Post new thread

Discuss CP12 for new boiler for non rented property in the Central Heating Forum area at PlumbersForums.net

eagleeye

eagleeye

Messages
149
Does anyone carry out a CP12 on a boiler replacement in a private non rented property ? We are thinking of doing them to cover ourselves. Any comments would be welcomed
 
eagleeye said:
Does anyone carry out a CP12 on a boiler replacement in a private non rented property ? We are thinking of doing them to cover ourselves. Any comments would be welcomed
Click to expand...

You will have tightness tested the installation and your own work should be in line with all current rules/regulations and be bench-marked.

I would generally 'cast' my eye over any other existing appliances, ventilation, what you can see of the installation etc.

Unless the customer has asked you to do a Landlord certificate/inspection, then you have no legal right or responsibility to do it.

What are you thinking of covering yourself for?
 
Last edited:

Reply to CP12 for new boiler for non rented property in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
exedon2
exedon2
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
79
Dan
Dan
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Advice
Tile Talk
Tile Forum
Contractor Advice Forum
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock