Cost of cp12

[psk]

This question really bugs me, how much should we charge the cust for a cp12 boiler and cooker only in the london area?

I received a call today and i told them my price, to my disbelief i was told by the custard that he was quoted £35!!!!

Now is that undercutting, desperation or just the recession?

Any thoughts

 

[Toned.f]

Gas safe need to get there act in gear and sort something out

That would be a first

 

[splinterdream]

Link eBay.co.uk Guides - How to Connect a Bayonet Hose to your Cooker or Hob

It isn't illegal what he has posted because anyone that is 'competent' can do their own gas fitting, however his own explanation doesn't come across as someone that is 'competent. There is no mention of purging the cooker, circumstances with which you cannot fit a flueless appliance (room without openable window to outside), use PTFE in the correct way (in the direction of the thread), commisioning the appliance (as it may be a bought used cooker), soundness testing the whole supply.
This, i think is immoral. Would you want to be living next to a DIYer connecting his own gas appliances by following an ebay guide like this. NOT ME.
I sent him a message and this is the reply i recieved.
The law states that work described can be carried out by" any competent person". You are judging people you dont even know. It is tradespeople like you that are a disgrace, over charging and doing shoddy jobs, I argue that the best way to ensure a safely done job is to do it oneself competently. It is almost impossible to get a tradesperson doing a job to do something 100% because they are typically ill educated dumbed down pawns of a capitalist consumer-driven culture.

 

[Toned.f]

Link eBay.co.uk Guides - How to Connect a Bayonet Hose to your Cooker or Hob It is tradespeople like you that are a disgrace, over charging and doing shoddy jobs, I argue that the best way to ensure a safely done job is to do it oneself competently. It is almost impossible to get a tradesperson doing a job to do something 100% because they are typically ill educated dumbed down pawns of a capitalist consumer-driven culture.

So says a "hell angel" and seller of tat on ebay.. who, quiet clearly has a plethora of issues and general angst towards GSR engineers in general.
He would be well advised to keep his opinions to himself otherwise he may at some point leave himself liable to redress within the civil arena.


Toned.f
Ill educated dumbed down time served pawn.

 

[REDSAW]

i will try and get this removed by the end of next week,
rses, cheesed of now.........dipstick

everyone read it then vote no, on was this post usefull....

 

[GQuigley67]

sometimes i wish i wasnt sittin behind a pc so i could lunge forward and punch that guy in the face(the ebay muppet)

 

[REDSAW]

dear sirs,
i refer to this guide, (Buying Guide ID 10000000004238386)
The 'unquallified' member giving incorrect & dangerous instructions & how to connect such a gas appliance, promotes an illegal activity to the installation such a gas appliance by a non qualified, registered gas operative via public media, as outlined in the competant persons scheme in the u.k. This law, ordered by 'the health & safety executive' (hse) provides guidelines to the use of such information and your own (ebay) rules state prohibitions of supply under:

quote.
Encouraging Illegal Activity

eBay prohibits the sale of items or links to items that encourage, promote, facilitate or instruct others to engage in illegal activities. In addition, eBay may remove listings as requested by law enforcement agencies to cooperate with any investigation or to prevent harm to eBay and its members.

d.i.y. gas fitting and its promotion is very dangerous and is liable for obvious reasons.

a copy of this complaint has been forwarded to,
the hse,
the gas safe register.

you are advised to contact them directly to assertain the rules of promoting & supplying directions to installing diy. gas fittings and its liability contained for such purposes.

regards.

that will make em skwirm.lol.

 

[splinterdream]

Good on ya redsaw. This guys rhetoric is truly immoral and highly dangerous.

 

[Mrs Tara Plumbi]

Link eBay.co.uk Guides - How to Connect a Bayonet Hose to your Cooker or Hob

The law states that work described can be carried out by" any competent person". You are judging people you dont even know. It is tradespeople like you that are a disgrace, over charging and doing shoddy jobs, I argue that the best way to ensure a safely done job is to do it oneself competently. It is almost impossible to get a tradesperson doing a job to do something 100% because they are typically ill educated dumbed down pawns of a capitalist consumer-driven culture.

Another way of looking at it is:
Those qualified gas wo/men have cleverly manipulated capitalist society to carve out a niche area of work protected for themselves exclusively - really clever
when over the past 30 years the traditional professions have lost their own exclusive rights to work - eg Lawers Solicitors (who prior to 1990's had big areas of work protected for themselves).

And at the same time Doctors, teachers, journals have all lost respect and given up perts of their work to others - especially medical doctors - a lot of their work now done by others.
Those ill educated dumb pawns have used capitalism to benefit themselves!