Search the forum,

Conversion from open vent

Post new thread

Discuss Conversion from open vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Lambed84

Lambed84

Gas Engineer
Messages
55
hi all.
As the tag line states, a conversion from open vent to unvented. Going to use a 210ltr tank moved from airing cupboard to loft.
My question is which brand do you guys recommend?
Looking at reviews etc online is contradictive...
Thanks in advance!
 
Gledhill but don't forget about reforcment of the floor
 
Sound. My dad's an engineer for them and he said theirs is best ... Always wary of the sales man patter this lol
 
IMO , get an ultrasteel cylinder its a Tribune with a different lid and a sticker , and a bit cheaper
 
Thanks guys!
The cylinder and ufh downstairs is the upgrade for me this summer courtesy of the wench
 
Status
Not open for further replies.

Reply to Conversion from open vent in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Firefox
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
117
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
194
mutley racers
M
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock