Discuss Combination indirect cylinder. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Triffid grower

Hi Gang

Is it ok to use an indirect combination cylinder with a wood burning boiler stove?

Thanks.
 
If it's the same as solid fuel then the cylinder should not be lagged.
Martin.
 
Thanks Martin...... I will be fitting a heat leak radiator.......any tips on that would be much appreciated.
 
Status
Not open for further replies.

Reply to Combination indirect cylinder. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
835
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form...
Replies
4
Views
232
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
366
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
252
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
293
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock