Search the forum,

Discuss Cherry Picker/ Boom Lift in the Plumbing Jobs | The Job-board area at PlumbersForums.net

village idiot

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,126
Hello everyone, just wanted to find out if anyone can advice where I can hire or rent a cherry Picker or boom lift in Manchester?
 
Thanks everyone, but who is Dave? Does he work for any of the companies that hire them out? I need it to make good a flue outlet. Just needed for an hour or two MAX but know I have to pay for the day. 10 metres high.
Can you let me know the company info where Dave works?
APPRECIATED .
 
Done. Used: Smart Platgorn Rentals Ltd. You must register with them though. But within two hours of registration, their lorry turned up (booked for half day £285 + VAT).
I was done in 30 mins. What a result.
Thanks everyone for assisting me. Special thanks to Dave
 

Reply to Cherry Picker/ Boom Lift in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
111
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
193
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
265
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
223
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock