Search the forum,

Discuss Camray 3 Oil Boiler Manual. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jackplumb

Anybody know where I can get a Camray 3 maunual also a Camray 2 manual would be handy.
Thanks.
 
Anybody know where I can get a Camray 3 maunual also a Camray 2 manual would be handy.
Thanks.
PM me with your email address jackplumb, I can send you the Camray 3 manual, sorry haven't got the Camray 2 though.....
 
What do you want to know? If it's just the burner info then use the Riello downloads page for settings.
 
I could really do with a copy, can someone help me out too ...thank you
 
i found it online by googling it, printed it off, been in my van for a few years now.
 
Just nozzel sizes really just to save a second visit,and possibility pup pressure. Just incase no info on boiler.know it's crap but want to see if can keep it going for them , even if one more year
 
Just nozzel sizes really just to save a second visit,and possibility pup pressure. Just incase no info on boiler.know it's crap but want to see if can keep it going for them , even if one more year

This any use to you? IMG_4340.jpg
 
Status
Not open for further replies.

Reply to Camray 3 Oil Boiler Manual. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
143
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
266
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
215
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
192
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
213
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock