Discuss Caleffi Automatic Air Release Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
-
Not open for further replies.
hi, can anyone advise on fitting one of these. i'm unsure about the black plastic bit on top and the one just below it on the side of the valve. it's a 15mm compression fitting and i know it needs to be fitted vertically at the high point on the primary circuit. cheers jack
- Status
-
Not open for further replies.
Reply to Caleffi Automatic Air Release Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
