Discuss Bristan regency shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
X

xjr13

I went to fit a new cartridge on a regency thermostatic shower.
The problem is that when I tried to remove cartride it was just turning with a clicking noise (stripped thread).
Anyone had similar problem and did you solve it.
Cheers steve
 
No I don't thinks so. The new cartridge has a thread on it.
Cheers
 
Status
Not open for further replies.

Reply to Bristan regency shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
377
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
183
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
351
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock