- Messages
- 5,439
Does that mean 0.2 and 1 bar will be fine yeah? (tank fed and main with a PRV fitted) Or does it mean it will work but not very well? And if not very well, what would be the problem?
Thanks
Thanks
- Thread starter WaterTight
- Start date
- Replies 0
- Views 29
- bristan differential mixer mixer shower pressure shower
Discuss Bristan mixer shower says max differential pressure 5:1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Bristan mixer shower says max differential pressure 5:1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Newest Plumbing Threads
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 0
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5