Search the forum,

Discuss boulter 1 72/95 settings? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

MarkOil

Morning all,
Has anyone got any details on this boiler? Or a copy of the manual, for all the service details.
Got one of these booked in for a service next week :S
Many thanks :)
 
take a reading before you service it, or more commonly judge the condition of the insides. If its all good inside then just make sure the settings are the same after as before. Better to try and keep the excess air to the usual level and CO below 50. Sometimes trying to set an older boiler to MI will give you headaches.
 
Status
Not open for further replies.

Reply to boulter 1 72/95 settings? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
702
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
495
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
221
D
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes sunk into wall behind bath. Walls have fresh tiles. Have realised as about to fit shower these pipes one is set higher than the other. If you fit a...
Replies
2
Views
162
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock