Discuss bonding in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dom brennan

Plumbers Arms member
Plumber
Gas Engineer
Messages
234
hi just a quick question just been b&q and seen they are selling off 100m for 4mm earth cable, are you aloud to use 4mm under the boiler on the pipes, it was only £6 i probably won't use it for a few years but i may come in handy
 
sparkies problem, all this secondary bonding rules have changed so not our problem, doing it wrong can actually make things worse!
 
Status
Not open for further replies.

Reply to bonding in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
336
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
351
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
331
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
334
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
246
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock