Search the forum,

Discuss boiler pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

joe1983

hi, does anyone know how i would find out what the operating pressure of a certain boiler (its the gloworm 30 hxi) would be please? i thought it was on the data badge, (20 mb) but not entirely sure now, thanks
joe
 
Careful please Scott. I know what he's going to come back with!
 
Joe before this gets locked. Are you gas safe registered?
 
Thought he might have been confused by the info on the data badge. I think the HXI has a digital pressure reading.
 
the best way to find out any spec of an appliance is through manufacturers information.
 
It's gas pressure, I'm training at the minute trying to sort my portfolio out, just had a question by my tutor asking what the operating pressure of the boiler is according to the manufacturers instructions or what's on the data badge, I thought it was 20 mb ?
Thanks,
joe
 
Status
Not open for further replies.

Reply to boiler pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
200
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
498
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock