Discuss Biasi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Dannyparty92

Any advice would be great. Biasi boiler not sure of model its an old combi boiler with old time clock on the front. Today I turned the boiler heating thermostat to zero then to max (no room thermostat in house) and moved programme to all the time as assoposed to timed and nowthe boiler only fires when there is hot water being drawn off is there something im missing or is the boiler thermostat cream crackered?
 
are you sure you put the programme to constantly on rather than constantly off?
 
Is there a summer/winter switch that needs to be on to switch the heating on, sometimes it's marked winter/summer or there are tap and radiator icon
 
Status
Not open for further replies.

Reply to Biasi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
290
PSxxxxxx
P
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
400
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
561
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock