Hi all I want to change my son's Baxi combi 80e to a potterton titanium I think the back mounting plates are the same but the potterton has an offset flue Baxi seem to make an offset flue adaptor and was wondering if anyone as done this change the Baxi is 15 years old and been relatively fault free but it is getting tired Thanks
Discuss Baxi combi 80d to potterton titanium in the Central Heating Forum area at PlumbersForums.net
- Messages
- 34,369
- Solutions
- 2
Are you gas safe ? ?
Reply to Baxi combi 80d to potterton titanium in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Hello,
I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl.
My wife thinks it looks scruffy....looks...
