Discuss Bath Mixer Tap Problem? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

wild nomad

Hi there,

The thermostatic bath taps are running too low pressure and are either freezing or boiling.

Anyone have any ideas as to what is wrong with it?
 
Has this just started happening or always been like this,if just started maybe check inlet filters first,if always like this..maybe check cold is not tank fed and hot on main....
 
Has this just started happening or always been like this,if just started maybe check inlet filters first,if always like this..maybe check cold is not tank fed and hot on main....

Yes, just started happening. Thanks for your suggestions :)
 
Status
Not open for further replies.

Reply to Bath Mixer Tap Problem? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
234
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
255
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
477
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
295
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock