Bath Identification Help!

[evilempire13]

Hi there, first time post so please be gentle with me!

I am looking at replacing my bath as it has a few cracks and has also discoloured. As it is a build in bath, I am looking to replace it with the same bath just to make it as easy as possible. However I am having trouble finding an exact replacement - i did see one on a site about a year ago but forgot to book mark it.

I have added some photos to help, but the written description is:

White plastic bath, approx size 1660mm long, 685mm wide, 400mm deep (inside depth). The base of the bar has circular pattern near plug. Two soap indentations at either side at plug end of bath. Sorry for the lack of technical terms!

Any help would be appreciated! Thanks in advance

 

[tamz]

Any std no tap hole bath will fit. Go into a plumbers merchant and see what they have.
You are probably going to loose a few tiles to get it done.

 

[jtsplumbing]

Standerd size bath ! if you are lucky it may just lift out of frame, if not will be costly replacement, Best of luck.

 

[evilempire13]

Any std no tap hole bath will fit. Go into a plumbers merchant and see what they have.
You are probably going to loose a few tiles to get it done.

Yeah I should have said I will be replacing all the tiles in the bathroom as well so that won't be a problem. Thanks for your advice, sounds like I need to go bath shopping!

 

[topdog]

hi new on here myself just had a look on ebay take a look they have some on the site might give you a idea on what you might pay out